8. GUI – Installation
The 4Corners menu is displayed.
Image 8-13
4Corners Warping
2. To enable 4 corners, make sure the
4 corners
slider is set to
On
.
The slider is enabled when set to the right and when it is colored blue.
3. To set warping on one or more of the four corners, select one of the four corners.
4. Set the desired X and Y coordinates for this corner, using the arrow keys.
Tip:
A red border corner will be projected along with the current image. The border is a visual aid, showing the result of the
warped corners.
5. Repeat from step 3 for each corner, until all corners are warped in the desired position.
To reset the 4 corner adjustments, select
Reset
and press the OK button.
8.3.5
Warping – Bow
About bow adjustment
A bow distortion can be adjusted so that a normal image is displayed. Positive adjustments introduce more outside bow distortion.
Negative adjustments introduce more inside bow distortion.
Image 8-14
Bow distortion
How to adjust
1. In the main menu, select
Installation
→
Warp
.
R5906112 UDX SERIES 24/05/2017
47
Summary of Contents for UDX 4K32
