4. Getting Started
Image 4-5
2. Unplug the power cord from the projector.
4.5
Using the RCU
Pointing to the re
fl
ective screen
1. Point the front of the RCU to the re
fl
ective screen surface.
Image 4-6
IR control via re
fl
ective screen
Hardwired to the XLR input
1. Plug one end of the remote cable in the connector on the bottom of the RCU.
2. Plug the other end in the big connector on the communication interface of the projector, labelled
Remote CTRL
.
Note:
Plugging the remote control will switch the broadcast address of the remote control to the default value ’0’. This is the
only broadcast address that will work when hardwired. If you want to change the broadcast address after disconnecting
the remote control, see "Projector Address", page 30.
Pointing directly to the IR sensor
When using the wireless remote control, make sure you are within the effective operating distance (30 m, 100 ft in a straight line).
The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote
control unit and the projector IR sensor.
R5906112 UDX SERIES 24/05/2017
29
Summary of Contents for UDX 4K32
