Barco UDX 4K32, User Manual

Page: 52 / 82

8. GUI – Installation
Image 8-15
Installation menu, Warp
2. In the Warp menu, select Bow .
Image 8-16
Warp menu, Bow
A check symbol at the bottom right corner indicates that the bow function is activated.
3. To enable Bow correction, make sure the Bow slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
Image 8-17
Bow adjustment
4. To enable a symmetric adjustment, make sure the Symmetric slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
5. Select an adjustment point and use the arrow keys to adjust.
When selecting a mid point of an edge, the bow angle can be adjusted.
When selecting a corner point, the linearity can be adjusted.
To reset the bow adjustments, select Reset and press the OK button.
8.4 Blending
About Blending
Blending is used in multi channel installation to have a seamless transition between the channels. Image blending gives the appear-
ance of a single view, thus achieving realistic immersion for the majority of wide screen applications.
The principle is that the light intensity in the blend zone from each projector will be adjusted individually, so that the rendering on the
screen are perceived as from one projector.
From the start (offset) position, you can blend zone size per edge (left, top, right, bottom). For each edge there will be a drop-off
curve for the blend zone.
48 R5906112 UDX SERIES 24/05/2017