Barco TF-20, Service Manual

Page: 67 / 95

7. Tile reassembling
7.5 Reassembling a Re-sync/controller unit
The TF-20 tile has a controller which is integrated on the re-sync unit. So, when replacing the re-sync unit of
the TF-20 tile, the controller is replaced as well. Tile information stored in the memory of the TF-20 re-sync/con-
troller unit is also stored in the memory blocks of the LED driver units. After replacement of the re-sync/con-
troller unit the tile will automatically restore the tile information into the memory of the controller while initial-
izing.
Necessary tools
• Cross head screw driver.
• Torx T10.
How to insert a Re-sync/controller unit?
1. Before reconnecting the cables, fi rst position the O-ring on the Re-sync/controller unit.
O-ring
Image 7-17
Power cable
LVDS cable
Data cable
Image 7-18
2. Put the Re-sync/controller unit back in its position and fasten the four screws.
R59770270 TF-20 21/05/2008 63