Barco TF-20, Service Manual

Page: 51 / 95

6. Tile disassembling
6.6 Disassembling a LED-frame of a back access tile
Necessary tools
• Torx T15.
• Safety cable with two safety hooks.
How to take out a LED-frame of a back access tile?
1. Unplug all power and data (LVDS) cables to the LED-frame. Remove the LVDS cables as illustrated.
a) Flip down the clips at both sides of the cable fasteners.
b) Remove the cable fasteners by pulling the clips open and
fi nally remove the data cables.
Power cable
Data cable OUT
Data cable IN
Image 6-25
2. Connect a safety cable with safety hooks between the LED-frame and the TF-20 tile.
Note: This safety cable is required in case of on side servicing and prevents a LED-frame from falling down.
Image 6-26
Safety cable.
Image 6-27
R59770270 TF-20 21/05/2008 47