Barco System manual E1, Installation & User Manual

Page: 37 / 124

Windows 2000 BarcoMed Nio software installation
38 System manual E1
Wizard”. Please be patient as this may take several minutes
while Windows scans its library of Plug-and-Play device
drivers to see if it has a driver for your BarcoMed Nio
controller.
3. If Windows advises you that it has finished installing all the
new devices in your system and that you must reboot your
system in order for the changes to take effect, click
“No” .
4. Insert your E1 Software CD into your computer’s CD drive. If
the “BarcoMed Product Installation Wizard” doesn’t start
within one minute, browse the contents of your E1 Software
CD and double click on the file:
“Setup.exe” to start the
wizard.
The BarcoMed Product Installation Wizard will begin by
inspecting your system to make certain that all of the
Windows components it needs are up to date. If they are, the
BarcoMed Product Installation Wizard will display the
BarcoMed Product Installation Wizard’s welcome screen (see
figure 15 on page 39). If the screen shown in figure 15
appears, please skip to step “5.” on page 40, otherwise
continue with the instructions on the next page.