Barco System manual E1, Installation & User Manual

Page: 31 / 124

Wall mounting
32 System manual E1
Wall mounting
You can mount the panel to the wall instead of to the foot, by
means of the supplied mounting plate. If you do not need to
mount the panel to the wall, please skip this item.
Step 1: Remove the panel from the foot
Figure 10
1. Position one hand under the panel at the front side. Position
the other hand at the rear, under the push-button with
BARCO logo (1).
2. Firmly press down the push-button (1) with one hand while
carefully lifting the panel up with the other hand.
3. Remove the panel from the foot.
Step 2: Fix the mounting plate to the wall
1. Screw the mounting plate to the wall with the 4 supplied
screws (figure 11).
BARCO
c