Barco SP2K-C, Installation Manual

Page: 46 / 156

R5914712 /00 SP2K-C 46
4.5 Connecting a UPS with the projector
electronics
WARNING: Only use UPS units which are suitable for the SP2K-C series projector. See chapter
Installation requirements , for more information about the requirements of the UPS.
CAUTION: The electrical connection with the UPS INLET socket of the projector must be done with
a certified AC power supply cord (minimum 1.50 mm² or 14 AWG and minimum 300V)
The projector is configured by default for use without UPS.
Required tools
• Torx screwdriver T20
• Flat screwdriver
• Open-end wrench 24 mm
• Nut driver 10 mm
• Torque wrench with 10 mm hexagon socket
Required parts
Certified AC power supply cord 1.5 mm², 14 AWG, min 300 V
How to connect a UPS unit with the projector electronics?
1. Make sure the net input cover has been removed. For more info, see “Accessing the power connections”,
page 41 .
2. Loosen the top nuts on the six UPS configuration pins. Use a 10 mm nut driver.
Image 4–12
3. Replace the links as illustrated.
Physical installation projector