BARCO 31
Daylight Display Systems
Power Connections
What has to be
done
Connecting tiles to one another and then to the Power Box. There are two power
connection ports on the back of each tile, the POWER IN and POWER OUT. These
must be connected correctly for proper operation.
Necessary Tools
-
Power
Connections
Follow the Connecting the power cables procedure:
For safety reasons, it is not advised to use any other parts than those recommended.
To be continued on next page.
1
2
3
1,2
There has to be one long Source Power Cable for each
column of six tiles in the display. The Source Power Cable
has to be connected with the lowest tile (power in socket)
of the column and the other end is plugged into the Power
Box.
A maximum of
6
(six) tiles can be connected to each other
via one source cable. For greater display sizes, more than
one source cable for each column containing more than six
tiles is required.
All tiles in a column are linked to each other in a daisy
chain manner using the power linking-cables: the POWER
OUT of one tile is linked with the POWER IN of the tile
above it. There is no power out cable on the sixth
connected tile (last tile in chain).
Step
Action
Image
Image 1 Power
Box
Source Cables
Summary of Contents for R9850010
Page 4: ......