Barco R9850010, Installation Manual

Page: 39 / 39

BARCO ——————————————————— 39 —————————— Daylight Display Systems
Image1 System
connection.
POWER BOX
C
CORNER TILE
(START POINT FOR DATA CONNECTION.
MAY BE REALIZED IN THE VERTICAL OR
HORIZONTAL DIRECTIONS)
DATA IN
TO DISPLAY
MAX 12 POWER OUTPUTS PER BOX
RS232 IN
POWER SOURCE CABLE OUTLETS
DIGITIZER
P.C.
RS232 OUT
C
C C
C
DISPLAY
Source
Signals
ADHERE TO SAFETY
GUIDE LINES
Complete System SetUp
What has to be
done
The four essential elements for a complete working system are the Digitizer, the Power
Box(s), the P.C and the Display. All should be interconnected appropriately.
Necessary Tools -
Connections To connect the complete system, follow the next procedure:
1
2
3
4
1
Connect the correct data cable from the ‘TO DISPLAY’
output on the rear of the Digitizer with the ‘DATA IN’ of the
chosen corner tile of the Display.
Connect the ‘RS232 OUT’ output from the P.C. to the
‘RS232 IN’ on the rear panel of the Digitizer with the
suitable cable.
Connect the Power Source cables from the Power Box(s)
to each lowest tile of each group of six tiles.
Connect correctly all power inputs to the Power Box(s),
Digitizer and P.C.
Step Action Image