BARCO 33
Daylight Display Systems
Data Connections
Follow the Connecting the Data cables procedure:
For safety reasons, it is not advised to use any other parts than those recommended.
To be continued on next page.
Data Connections
What has to be
done
Connecting tiles to one another and then to the Digitizer. There are two data connection
ports on the back of each tile, the DATA IN and DATA OUT. These must be connected
correctly for proper operation.
Necessary Tools
-
1
2
3
4
1
There are two ways to realize the data-linking of the tiles,
either in the horizontal or vertical directions.
Always start the linking with the first tile of the display (the
tile that is connected with the digitizer.) This first tile can be
any tile in a corner.
The data cable coming from the digitizer is connected to
the DATA-IN of the first tile, daisy chain the data-linking
cables from the DATA-OUT of one tile to the DATA-IN of
the next. This daisy chain linking can be performed either
in the horizontal or vertical directions. There is no data out
cable on the last connected tile (last tile in chain).
Specify in the setup Controlling Software how the data
linking of the tiles is realized (Horizontal or Vertically).
Step
Action
Image
Summary of Contents for R9850010
Page 4: ......