RS232 Protocol NSL-4601
38 of 58
This function is for only COMPONENT,S-VIDEO,AV. This function can’t adjust at PC and DVI(fixed
to 50).
3.3.6 SHARPNESS(Range
0~100, Default value = 50)
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “SPU”, “SPD”, “SHA” and return cmd is “SHA=”.
This function is for only COMPONENT,S-VIDEO,AV. This function can’t adjust at PC and DVI(fixed
to 50).
3.3.7
SUB BRIGHTNESS(Range 0~75, MWCP default value is 30. But monitor’s
default value is different as current source. So if you want to know current
value, you have to read single set value.)
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “SBU”, “SBD”, “SBR” and return cmd is “SBR=”.
This function is used to adjust color only factory line or service. Don’t open to normal user.
This function is used to adjust picture brightness offset of scaler.
3.3.8
RED, GREEN, BLUE OFFSET(Range 0~80, MWCP default value is 40. But
monitor’s default value is different as current source. So if you want to know
current value, you have to read single set value)
- RED
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “ROU”, “ROD”, “ROF” and return cmd is “ROF=”.
- GREEN
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “GOU”, “GOD”, “GOF” and return cmd is “GOF=”.
-
- BLUE
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “BOU”, “BOD”, “BOF” and return cmd is “BOF=”.
These functions are used to adjust color only factory line or service. Don’t open to normal user.
These functions are used to adjust picture Red/Green/Blue offset of scaler.
3.3.9
SUB CONTRAST(Range 0~75, MWCP default value is 30. But monitor’s
default value is different as current source. So if you want to know current
value, you have to read single set value)
Same format as COLOR BRIGHTNESS SETTING.
but send cmd is “SCU”, “SCD”, “SCO” and return cmd is “SCO=”.
This function is used to adjust color only factory line or service. Don’t open to normal user.
This function is used to adjust picture contrast gain of scaler.
