Barco MiPIX-20, Installation Manual

Page: 12 / 27

2. System Overview
The MiPIX control unit needs to be powered up with 230VAC. A power split cable can be used to split off the power of the power
source cable. The MiPIX-20 blocks, connected with the MiPIX control unit, are provided with power (low voltage) coming from the
control unit via the flat cables.
Choose a dustless area to install the control unit . Clean the air entrance of the control unit at a regular time
interval.
Order info
Article No. Description Image
R9852240 MiPIX control unit image 2-7
R9851180 Power extension cable (1.5 meter) image 2-8
R9852130 Power split cable image 2-9
R9852135 Power split cable (5 pack)
R98521310 Power split cable (10 pack)
R9851980 MDR cable of 5 meter (used for connections between control units) image 2-10
R9851980
MDR cable of 5 meter (used for connections between control units)
image 2-10
Z3499406 MDR cable of 1 meter (used for connections between control units)
R9851970 MiPIX prime-cable of 25 cm image 2-11
R9852250 MiPIX control unit plus cable set:
• 1 power extension cable
• 1 power split cable
• 1 MDR cable of 5 meter
• 4 MiPIX prime-cables of 25 cm
R9852255
MiPIX control unit plus cable set (5 pack)
R98522510 MiPIX control unit plus cable set (10 pack)
R9851218 DVI - MDR cable of 5 meter (used for connection between digitizer
and control unit. image 2-12
Image 2-7 Image 2-8 Image 2-9
8 R5976717 MIPIX-20 07042004