2. System Overview
Name
Value
Power consumption
1.2 W/block (maximum)
206 W/system (1 MiPIX control unit plus 128 MiPIX-20 blocks)
Dimensions
40.3 x 40.3 x 22 mm (W x H x D)
Weight
34 gram (inter-block cable included)
Processing
14 bit
Refresh rate
1045 Hz
Operating temperature
0 to 40 ºC (32 to 104 ºF)
Storage temperature
-20 to 60 ºC (-4 to 140 ºF)
Operating humidity
0 - 85%
Storage humidity
0 - 90%
Source compatibility
S-Video, Composite, YUV, RGB, SDI, HDSDI, Data DVI up
to UXGA
Structure
Plugs into metal structure, can handle multiple inserts
IP rating
IP20
2.2.3
MiPIX-20 dimensions
Dimensions
2
0
,3
6
m
m
4
0
,3
m
m
3
5
m
m
3
4
m
m
22 mm
1,5 mm
28,19 mm
35 mm
20,36 mm
40,3 mm
11,6 mm
Image 2-6
Dimensions given in millimeters.
2.3 MiPIX control unit
2.3.1
MiPIX control unit introduction
Introduction
The MiPIX control unit has a built-in re-sync unit which receives data from the digitizer or from the previous control unit and reads
out the necessary information for that branch of MiPIX blocks connected with the control unit. After re-clocking the incoming data,
the signal is transmitted to the next control unit.
The MiPIX control unit contains four output ports. Each output port can be connected with a chain of MiPIX blocks, using flat cables.
Maximum 128 pixels can be driven per output port. So, using the MiPIX-20 blocks which contains 4 pixels per block, a chain of
maximum 32 MiPIX-20 blocks can be connected to one output port of the MiPIX control unit. As a result, one MiPIX control unit can
drive maximum 128 MiPIX-20 blocks.
R5976717 MIPIX-20 07042004
7
