Barco MiPIX-20, Installation Manual

Page: 14 / 27

2. System Overview
2.4 MiPIX stand alone re-sync unit
2.4.1 MiPIX stand alone re-sync unit introduction
Introduction
In some applications the MiPIX control units stand more than five (5) meter from each other. To ensure that, in such a case, a good
data signal is offered to the next control unit the use of the MiPIX stand alone re-sync unit is required. This way, distances up to
twenty (20) meter between MiPIX control units can be bridged over. One MiPIX stand alone re-sync unit can bridge a distances of
five (5) meter. Maximum three (3) MiPIX stand alone re-sync units are allowed between two (2) MiPIX control units.
Order info
Article No. Description Image
R9851990 MiPIX stand alone re-sync unit image 2-14
R9852260 MiPIX stand alone re-sync unit plus MDR cable of five (5) meter
R9851980 MDR cable of five (5) meter
Image 2-14
2.4.2 MiPIX stand alone re-sync unit specifications
Specifications
Name Value
Maximum length output cable Five (5) meter
Maximum number of MiPIX stand alone re-sync units between
MiPIX controller units Three (3) units
Weight 300 gram
Dimensions
220 x 80 x 21.5 mm (W x H x D)
IP rating IP20
10 R5976717 MIPIX-20 07042004