Barco Loki, Installation Manual

Page: 51 / 128

601 – 0445 /05 Loki 51
Image 5-2: Select source
2. Press OK .
The Home / Source menu is displayed with the actual available sources filled out.
3. Scroll down to the bottom of the list of available sources and select Connector Settings .
The available input connectors are displayed.
Image 5-3: Select source
4. Select the desired connector.
The Connector Settings menu for this connector will be displayed.
Image 5-4: Example of connector settings of an HDMI Connector.
5. You can change the following:
• To force a limit on the color space, select one of the available color spaces .
• To force a limit on the used signal range, select one of the available signal ranges .
• To set a video timing other than the one native for the connector, select one of the options under EDID .
Note: You cannot change the EDID for SDI connectors.
Source menu