Barco HDF W series, Use And Installation Manual

Page: 288 / 319

17. Servicing
Take off the dummy cover plate.
Insert the new input module in its compartment.
Make sure the module seats in its sliders (2).
Pull in the module until the contacts (3) are fully inserted into the connectors.
Fixate both fi xation screws.
1
Image 17-2
Fixate input
17.2 Replacement of the dust fi lter on the front side
Necessary parts
New HEPA dust fi lter for the front side (R9854470).
How to replace the HEPA dust fi lter on the front side
Remove the front cover of the projector, see "Removal of the front cover", page 275.
Remove the HEPA dust fi lter on the front side by pulling the two spring clamps away from the fi lter and then moving the fi lter forwards.
2
1
Image 17-3
Front
fi lter
Insert a new HEPA
6
fi lter by pulling the two spring clamps away and move the fi lter into position.
Caution: Make sure that the air fl ow indicated on the dust fi lter match with the air fl ow of the fans.
Reinstall the front cover of the projector, see "Installation of the front cover", page 278.
C
AUTION
:
Never install a used HEPA fi lter. Always install a new HEPA fi lter.
6. High Efficiency Particulate Arrestant
284 R5905158 HDF SERIES 16/06/2015