Barco HDF W series, Use And Installation Manual

Page: 172 / 319

12. Alignment
12.7.10 Selecting and changing the position of a speci fi c point
About point selection
Depending on the warp level, number of selectable points, a speci fi c point can be selected and moved in any direction. The coordi-
nate system works with 33 x 33 pixels (0 to 32). Depending on the warp level the cursor will jump from active point to active point.
E.g. for 5 x 5 the fi rst point has coordinates (0,0), the second point in horizontal direction will have coordinates (12,0), etc. .
How to select a point
Select the warp level (1).
1
3
2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 24 26 25 27 28 30 29 31 32
1
21
11
6
16
5 3 2 4
25
15
23
13
24 22
10
20
8
18
12
14
7 9
19
17
Image 12-46
Point selection
Select Warp mode points (2).
Use the ▲ or ▼ key to go to Point selection.
Select alternating the X and Y coordinate and change the value (3).
Or,
press
ENTER to open the point selection window.
Use the 4 arrow keys to select the desired point.
Press
ENTER to the Warping adaptations.
Image 12-47
Point selection Image 12-48
Moving selected point
Use the 4 arrow keys to change the position of the selected point.
12.7.11 Scaling the image
About scaling
It is possible to scale the whole image. This is considered as an equal scale of the 4 corner points in 2 x 2 mode. The Warping
adaptation window is used to scale the image.
How to scale
Select the 2 x 2 adjustment level. See "Setting the warping level", page 164.
The default selected anchor point is the left top corner of the image.
Select the desired warp area.
168 R5905158 HDF SERIES 16/06/2015