Barco HDF W series, Use And Installation Manual

Page: 256 / 319

13. Projector Control
To lock to a speci fi c value a 4 digit code is necessary; These codes can be created by the projector owner using Projector Toolset.
13.15.2 Light output con fi guration via OSD menu
What can be done ?
The activation code can be entered by the projector user. This code is validated and when valid the maximum light output is set
accordingly.
How to set
Press Menu to activate the menus and select Projector Control .
Image 13-150
Main menu, projector control
While Projector Control is selected, enter the hidden code “8069”.
A Device con fi guration menu opens.
Image 13-151
Projector control, device con
fi guration
Enter the 4 digits of the activation code using the digit keys on the remote control or the local keypad.
If the code is correct, the message: “Device successful con fi gured as <projector name>” is displayed and the projector is set to
corresponding maximum light output.
Image 13-152
Successful con
fi gured
If the code is incorrect, the message: “Invalid attempt!”, is displayed:
Image 13-153
Invalid attempt
After 3 invalid attempts, the message: “Invalid attempt! Try again after 300 seconds” is displayed.
Image 13-154
252 R5905158 HDF SERIES 16/06/2015