7. Electronic parts and servicing procedures
Image 7-104
Optional input layer:
fi
xing screws of the blank cover plate
3. Insert the optional input layer in the input module
4. Push the optional input board to the left side to plug in the board-to-board connectors to the PMP
5. Fix the optional input layer to the PMP using a
fi
xing screw
Note:
This screw can be reached from the left side of the projector without taking out the input module
6. Fix the optional input layer to the front panel using the
fi
xing screws
7. Install the covers (see concerning chapters)
-
front cover
-
rear cover
7.8
Desktop input board
Overview
•
Description of the desktop input board
•
Removing the desktop input board
•
Installing the desktop input board
7.8.1
Description of the desktop input board
Description
The
desktop input board
receives the desktop image through a DVI connector. This data is sent to the LVDS interface after conver-
sion.
This board also receives information from the PMP and sends it to the LCD panel to be displayed.
The desktop input board is mounted inside the desktop input unit, which also includes the LCD module.
Picture
Image 7-105
Desktop input unit
86
R59770141 GALAXY NH-12 20/02/2008
Summary of Contents for Galaxy NH-12
