Barco Galaxy NH-12, Service Manual

Page: 115 / 146

7. Electronic parts and servicing procedures
Image 7-162
Front IR receiver:
fi xing screws
5. Remove the front IR receiver and replace it by a new one
6. Fix the new front IR receiver to the protection plate of the wires using two screws
Image 7-163
Front IR receiver:
fi xing screws
7. Fix the protection plate to the bottom of the projector using three screws
Image 7-164
Wire protection plate:
fi xing screws
8. Install the cover (see concerning chapters):
- front cover
- rear cover
7.18 Local keypad / IR receiver
Description of the local keypad / IR receiver
The projector can be controlled by serial commands, by a remote control or using the local keypad.
R59770141 GALAXY NH-12 20/02/2008 111