![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748091.webp)
7. Electronic parts and servicing procedures
7.8.2
Removing the desktop input board
Necessary tools
•
Torx screwdriver T10
•
Nut spanner 3/16”
How to remove the desktop input board?
1. Remove both
fi
xing screws at the front panel
Image 7-106
Desktop input unit:
fi
xing screws
2. Pull out the desktop unit until the connectors can be reached
3. Unplug the connectors:
-
J320: I2C going to the PMP
-
J360: power supply from the power box
-
J200 and J201: data going to the LVDS interface
4. Slide out the desktop input unit
Image 7-107
Desktop input unit (rear view)
5. Disconnect the LCD module from the desktop input:
-
J300: data to the LCD module
-
J301: backlight to the LCD module
6. Remove the screws and bolts
fi
xing the desktop input board to the unit
R59770141 GALAXY NH-12 20/02/2008
87
Summary of Contents for Galaxy NH-12
