![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748092.webp)
7. Electronic parts and servicing procedures
Image 7-108
Desktop input board:
fi
xing screws
7. Remove the desktop input board
7.8.3
Installing the desktop input board
Necessary tools
•
Torx screwdriver T10
•
Nut spanner 3/16”
How to install the desktop input board?
1. Fix the desktop input board to the unit using two bolts and two screws
Image 7-109
Desktop input board:
fi
xing screws
2. Connect the LCD module to the desktop input board
-
J300: data to the LCD module
-
J301: backlight to the LCD module
3. Slide in the desktop input unit until the connectors can be plugged in:
-
J320: I2C going to J19 on the PMP
-
J360: power supply from connector 6 on the power box
-
J200 and J201: data going to J2 and J3 on the LVDS interface
4. Push in the desktop input unit completely
5. Fix the desktop input unit to the front of the projector
88
R59770141 GALAXY NH-12 20/02/2008
Summary of Contents for Galaxy NH-12
