Barco F90 series, Service Manual

Page: 89 / 141

20. Scheduled operations
20. SCHEDULED OPERATIONS
20.1 About
For details of the service intervals and components to be changed, see "GP6 periodical maintenance", page 27
This section outlines replacement of parts which have a pre-de fi ned life cycle, where replacement is required at regular intervals.
Such parts adhere to a life cycle management system which prompts the user when replacement is due. Resetting the part life cycle
in the service menu may be required.
The GP6 platform LFM has 2 main service intervals, 20.000 hours and 40.000 hours.
If optical components such as color wheel, phosphor wheel or laser clusters have been replaced, it may be necessary to do an index
adjustment of the color wheel and/or phosphor wheels. See chapter "Colorwheels", page 47 for details.
All service intervals shall be carried out by authorized service technicians in controlled environments, typically at a service center
20.2 20000 hours LFM Service
20.2.1 Phosphor wheels (2 pcs)
The projector covers must not be removed when performing this procedure.
C
AUTION
:
Heavy lifting! Barco recommends two persons carry out this procedure.
1. With the unit covers still installed, place the unit on its right side.
2. Release 7pcs ( TX10 M3x8 washer) used to secure the Bottom Cover
Image 20-1
3. Release 5 screws (Tx 10 M3x10) used to secure each cover for the Phosphor wheel compartments.
4. Release 3 screws (Tx8 M2.5x6) securing the phosphor wheels.
723–0016 F90 01/12/2017 87