Barco Event Master E2 User Manual Download

Page: 255 / 307

10. Maintenance

Image 10-58

3. Gently pull the Genlock assembly away from the unit . Don’t pull the assembly too far back because there are still 2 cables

attached.

Note:

At this point there are still 2 cables connecting the Genlock Assembly to the unit.

4. Unlatch the VFD ribbon cable from the connector and pull it up and away from the Genlock board.

Note:

This cable connects the Genlock board to the System-Power board.

Image 10-59

5. Unlatch the Ethernet cable from the connector and pull back and away from the Genlock board.

Note:

This cable connects the Genlock board to the System-Power board.

R5905948 E2 12/12/2014

251

Summary of Contents for Event Master E2




















































































































































































































































































































Search results

Summary of Contents for Event Master E2

Reviews:

Related manuals for Event Master E2

Brands by name

Popular brands

Barco Event Master E2, User Manual

Search results

Summary of Contents for Event Master E2

Reviews:

Related manuals for Event Master E2

Brands by name

Popular brands