Barco Event Master E2, User Manual

Page: 302 / 307

C. Troubleshooting
Problem Possible cause Remedy
Can’t read or write to or from the USB drive Incorrect USB format or bad USB Ensure that your fl ash drive is formatted
to use the FAT32 fi le system. If you can’t
access the USB from a PC, then you have
a faulty USB drive.
The front panel display screen is too dark display brightness Use the “VFD brightness” sub-menu in
the System menu to adjust the intensity of
the front panel vacuum
fl uorescent display
(VFD) screen.
The unit is not responding to any front
panel button presses. Front panel is locked To unlock the front panel, press and hold
the
SEL and ESC buttons simultaneously
for 3 seconds. When the panel is unlocked,
the display screen displays the Status
menu.
After factory reset, the IP address is lost Wrong mode of the factory reset command
was used Use the “Factory Reset, Save IP” choice
in the “factory reset” sub-menu when you
perform a factory reset.
Unable to perform web upgrade Unable to perform web upgrade Make sure E2 connection with the LAN is
available.
Make sure there is an internet access in
the LAN
298 R5905948 E2 12/12/2014