Barco Event Master E2, User Manual

Page: 164 / 307

7. System Setup
7.3 Power up and Status check
General
Use the following steps to power up your E2 system and check system status.
Prerequisite
• Ensure that your system is properly installed and cabled.
• Ensure that you are familiar with the System Menu . For details on all menus, please refer to chapter "Front Panel Menu
orientation", page 45.
Power up system and check system status
1. Turn on the unit and wait while it initializes. During the initialization process the front panel displays: “Program Loading Please
Wait”.
The Status Menu is automatically displayed after initialization is completed.
2. Power up all peripherals, such as display devices (projectors, monitors) and sources.
3. Turn on the PC and run the EM GUI software.
The system con fi guration page is the fi rst page that appears when the EM GUI is launched.
4. On the Status Menu:
- System1 is the default value displayed as System Name if this is the fi rst start of the unit. This name can be changed in the
con fi guration page of the GUI.
- Ensure E2 is connected on the local network. If there is no internet connection, or if a DHCP server has not been found, the
IP address is 000.000.000.000. In this case, re-check all Ethernet connections. After checking connections, if devices still
report “Not Connected,” use the procedure "Communication setup", page 162.
160 R5905948 E2 12/12/2014