Barco Event Master E2, User Manual

Page: 175 / 307

7. System Setup
7.14 Con fi guration Menu > Add Screen Destinations & Layers
General
In this procedure, you will Add Screen Destinations from the de fi ned outputs.
Prerequisite
• Ensure that you are familiar with the Con fi guration Menu . For details on this menu, please refer to chapter "Con fi guration
Menu", page 76
If more than one Destination is utilized, repeat the below steps until all Destinations are added.
Add Screen Destinations
1. Click on the Destination tab to de fi ne destinations for the de fi ned outputs.
2. From the diagram area click on the output that you want to be part of the destination.
3. Click on the +Add Screen Destination blue button to assign the output to the screen destination .
4. When the destination is created a box appears next to the E2 diagram.
5. If the more than outputs are part of the destination drag and drop these outputs into the destination box. You will observe that
the destination size automatically updates as new outputs are added to the destination.
Add Layers to Destinations
Click on the Adjust tab that is located on the top.
1. Under the Assign sub-menu click on the +Assign Layer to Destinatio n blue button.
2. Click on this button as many times is required to add the layers you are assigning to the destination. Observe the number of
layers indicated in the Layer box is incremented every time the add button is pressed.
3. If you need to delete layers, click on the Blue button Delete layers .
(Optional) Edit the Name
1. Double click on “Destination1” in the Name list to edit the name.
2. When the area turns blue, click the eraser icon to clear the fi eld.
3. Type a new name and hit enter when done.
(Optional) Adjust Destination Parameters
Click on the “Adjust” tab that is located on the top. From this menu you can adjust:
1. Edit the name.
2. Select Format value, color space and connector type.
3. Enable Test Patterns with raster box and enable diagonal motion.
4. De fi ne the Area of interest (AOI).
5. Perform color adjustments.
6. Read the timing parameters associated with the selected format.
7. Select SDI type and SMPTE standards.
8. Adjust data Doubling parameters.
9. Adjust feathering parameters.
(Optional) Delete Destinations
1. Click on the blue button Delete Destination(s) .
2. From the Name list click on the “ x ” space next to the output(s) you wish to delete.
3. Hit the red button Delete Destination(s) button. All of the selected Destination(s) will be removed from the list.
R5905948 E2 12/12/2014 171