3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
3-22
3.2.8
Streaming Video Card
The S
TREAMING
V
IDEO
C
ARD
provides the capability of displaying compressed encoded digital video streams. The
digital signal is decoded for further processing in the E
OS
. Up to four video streams can be processed simultane-
ously. The S
TREAMING
V
IDEO
C
ARD
allows a redundant connection to the Ethernet.
Standard
The S
TREAMING
V
IDEO
C
ARD
supports MPEG-2 streams over Ethernet. Please refer also to section
Connectors
The S
TREAMING
V
IDEO
C
ARD
provides two RJ45 connectors to establish the connection to the network. For a redun-
dant connection a network cable should be plugged into each of the plugs [1] and [2 ]. These network cables
should connect on the other side to a redundant network. In case of a failure of one connection the other con-
nection will take over the complete network traffic. If a redundant connection is not required either plug [1] or
plug [2] can be used for the connection. Both plugs use the same IP and MAC address, so no configuration in
regard of the used plug is required.
1
3
5
6
4
2
7
8
9
10
1
RJ45 Network connector 1
2
RJ45 Network connector 2
3
green LED: connector 1 connected to the Ethernet
4
green LED: connector 2 connected to the Ethernet
5
green LED:
ON connector 1 connected with 100 Mbps
OFF connector 1 connected with 10 Mbps
6
green LED:
ON connector 2 connected with 100 Mbps
OFF connector 2 connected with 10 Mbps
7
stream 1 is active
8
stream 2 is active
9
stream 3 is active
10
stream 4 is active
Figure 3-29
connectors of the S
TREAMING
V
IDEO
C
ARD
Order
The order of the S
TREAMING
V
IDEO
C
ARDS
in E
OS
is determined in exactly the same way as with the Q
UAD
A
NALOG
V
IDEO
C
ARD
, please.
Specifications
For detailed technical specifications of the S
TREAMING
V
IDEO
C
ARD
