Barco DP2K-12C, Service Manual

Page: 233 / 359

12. Card Cage
11
Image 12-32
9. Tighten the 4 lock nuts (reference 12, image 12-33) on the Button module mounting bolts.
12
Image 12-33
10.Connect the fl at cable to the Button module by performing the following procedure:
a) Make sure the locks at both sides of the socket are pulled out (step 1, image 12-34).
b) Insert the
fl at cable into the socket (step 2, image 12-34).
c) Lock the fl at cable by pushing in the locks at both sides of the socket (step 3, image 12-34).
1 2 3
Image 12-34
R5905043 DP2K-12C/11CX 19/02/2018 229