AC power connection
5-4
5976065 BARCOCINE 8 08022000
Start up in Stand by Mode
The projector starts up in stand by.
Press a digit key corresponding to the desired source or press STBY key.
The projector displays the selected source or the warm up cycle message.
When this warm up message appears on the screen, handle as described in 'Start up in Operational Mode'.
Start up with "Warm up period"
If no action is taken, a white image will be displayed for 20 minutes.
This white image will be shifted on the faceplate of the CRT to avoid CRT burn-in.
During this warm up period, it is possible to interrupt this white image projection by pressing the
<EXIT> key. The "Projector warm
