Barberan RP-30-FM1, Instruction Manual

Page: 5 / 129

MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS
When the production of a profile type is over or when the profiles or veneer
strips are empty, the feeding will be interrupted in order to fit the machine
again to continue the production.
In order to reduce the stopping times, one operator can control the waste of
veneer sheets/ foil and glue and have a new spool and new glue ready to be
replaced in the machine. The supply of new containers with profiles or the
evacuation of the containers with the wrapped profiles can be done by the
same operator or the person encharged with the maintenance of the factory.
When the machine has to be prepared to wrap another different profile type
it is recommendable that two operators situated at both sides of the machine
adjust the pressure rollers at the same time.
When the working process has finished it begins the foil surplus and glue
collection. The cleaning process can be done by just one operator as
described in the correspondent section.
ASSEMBLING
The wrapping machine is composed by a bedframe which supports all the
wrapping components. Some parts can be supplied disassembled in a
wooden box in order to save packing volume.
At the receipt of the machine, please check all parts. In case there are some
damaged parts produced by the transport, please advise the manufacturer
in order to replace these parts and claim to the transport company.
For the machine positioning it is not necessary a special foundation or
placing vibration mufflings.
Situate the machine in its definitive place using appropriate lifting methods.
Level the machine in two horizontal, perpendicular directions using the
levelling screws situated at the machine base. Check if the working height of
this machine is equal to the feeder and the machines situated before or after
it. The reference for this levelling is the mechanised part of the bedframe.
Alienate the wrapping machine with the machines before and after.
Prepare the electric connections up to the electric cabinet of the machine.
Introduce the electric wire (of appropriate section for the installed power)