Barberan RP-30-FM1, Instruction Manual

Page: 4 / 129

MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS
NORMAL POSITIONING CONDITIONS
The positioning of this machine must be realised in a closed site. The floor
must be horizontal, flat and non sliding. Good light conditions and an
atmospheric air circulation which guaranties more than 5 air renovations per
hour must be available.
The machine must have enough free space at both sides to make the
access and maintenance more easy. The minimum free space at the control
side must be 2 m and 1 m at the opposite side.
In all this mentioned space it is not permitted to place materials neither
obstacles. At a greater distance can be situated the veneers and the
recipients of the granulated hot melt glue for the consumption of one day.
At the machine' s or profile feeder' s infeed will be placed a container with
the profiles to be wrapped and at the outfeed another one for the wrapped
profiles.
If this wrapping machine is situated behind other machines, conveyors or
feeders it must be guarantied that any stop of this machine will order also
the stop of the precedent machines.
In case that this wrapping machine has other machines or conveyors placed
after it, any stop of this machine has to order also the stop of the machines
behind it.
In case this profile wrapper is a part of an installation, all the machines must
be adjusted at the same speed. Check that the tension and frequency of the
feeding net is according to the electric diagram.
WORKING PLACES
During production, only an operator is enough to control this machine. This
operator will be normally situated at the control side of the machine and will
take care of the profile feeding.