Barazza 1MCFY, Instructions For Use Manual, Page: 22 / 320

22
EN
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time by
pressing the
Stop key once or by opening the
oven door.
In both cases:

Microwave emission is stopped immediately.

The grill is de-activated but is still very hot.
Danger of burning!

The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Stop
key.
To restart the process, close the door and press
the
Start key
Altering parameters
The operating parameters (time, weight, power,
etc.) can only be altered when the cooking
process has been interrupted by proceeding as
follows:
1. To alter the time, press key
“
-
” and “
+
”. The
new time defined is immediately valid.
2. To alter the power, press the Power
Selection key. The display and respective
light start to flash. Alter the parameter by
pressing the
“
-
” and “
+
” keys and confirm by
pressing the Power Selection key again.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press
the
Stop key for 3 seconds.
You will then hear a beep and the time will appear
on the
display .
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
“
End
”.
The beeps are repeated every 30 seconds until
the door is opened or the
Stop key is pressed.