30
Installation
This information is exclusively for the installer
who is responsible for assembly and
electrical connection. The manufacturer will
not accept liability for possible damage
caused if you install the oven yourself.
Before installation
•
To handle the oven, use the grips at the
sides. Do not use the door handle to lift
the oven.
•
Do not install the oven behind decorative
doors. This can cause it to overheat.
•
When installing the oven under a
counter, follow the instructions for
installing it.
•
In general, protruding elements (furniture
reinforcements, pipes, socket bases,
etc.) at the back of the unit must be
avoided.
•
When the base of the main power socket
is inside the unit in which the oven is
installed, this must be done in the
shaded area.
•
The unit in which the oven is installed
and adjacent units must withstand
temperatures higher than 85 ºC.
•
The installation instructions must be ad-
hered to strictly. If not, the oven’s
ventilation circuit may become blocked,
causing high temperatures that could
damage the kitchen unit and the
appliance itself.
•
For this purpose, check the unit
measurements and those of the holes to
be drilled in the units, as shown in the
following figures:
Column Installation:
Undercounter Installation:
Electrical connection
The fitter must ensure that:
•
The mains power voltage and frequency
correspond to what is marked on the
identification plate.
•
The
domestic
wiring
system
can
withstand the maximum power marked
on the identification plate.
•
After connecting the power supply, check
that all electrical parts of the oven are
working correctly.