49
5.2 ADJUST THE BRAKE OF THE AIR GAP
Due to wear and tear, the rated air gap would be a big Z. In order to ensure brake torque, enough in the air gap must be
adjusted before peak. Air gap can adjust many times, when the thickness of the friction brake to achieve the minimum
value, must change the friction brake disc. The noise of the braking torque and crack.
When the air gap is more than the maximum, it may cause brake can't release the brake, friction brake is on fire, and even
cause serious accident. Must regularly check and adjust the air gap, attention must disconnect the main power supply.
Operation of a variety of data consistent with the following table, please
Standard torque
(Nm)
Power
(W)
Standard torque
air gap (mm)
Mounting screw
strengthen
(Nm)
5
20
0.3-0.35
2.8
If the air gap is more than 0.35 mm, replacement or brake disc brakes
Step 2:
Fixed
brake
three
screws loosen
Step 1:
Adjust the three screw
Step 3:
With a feeler check air gap Z is
the rated air gap value
Summary of Contents for EP16-N01
