26
Figure.12: replace the battery
3.7 BATTERY CHARGING AND REPLACEMENT
Only qualified personnel are allowed to repair or to rechange the battery, please be sure to
follow the manual instructions and battery manufacturers
The battery is a free maintenance, no bleeding again
Battery recycling need to follow the national laws regulations, please follow these rules
When handling the battery, it is prohibited to use open flame, can cause gas explosion
Prohibited in the area of the battery materials or combustion liquid, no smoking, well ventilated
area must be guaranteed
Before charging or installation/replacement battery needs good safe parked vehicles
Before completing the repair the repair work, please ensure that all of the cable connected
correctly and not interfere with other parts to a vehicle
For the standard battery, this car is equipped with the following valve control type sealed lead acid
battery model.
One 2VBS 24 V/ 160 Ah (EP16)
Only allowed to use the liquid acid sealed batteries
The weight of the battery had certain influence on vehicle operation
behavior
Please consider the highest working temperature of the battery
a.
REPLACEMENT
EP16-N01
Safe parking vehicles, shut off the key switch (8), and press the abrupt
stop switch (7) to shut down the vehicle. Open the battery cover and keep
upright. Unplug the battery connector (16), and then hanging out the
battery.
Install from the move instead, please first connect the positive terminal, otherwise easy damaged
vehicles.
b.
BATTERY INDICATOR
Discharge conditions with ten red LED display
section.
Battery discharge
Battery full
Figure. 14: battery discharge indicator
Summary of Contents for EP16-N01
