Using the Operator Settings
43
4.3.7 Counter Test
In the page of
[Counter Test]
, you can test whether the counter is normally functioning
or not.
1
Enter
[Operator Settings] > [Hardware Test] > [Counter Test]
.
2
In the page of
[Counter Test]
, press the button, and the system will automatically
run for 5 times (from 0 to 5). You cannot discontinue the counting process. When the
counter is running, pressing the button is useless.
3
Open coin box door to check counter for any issues.
4
After completing the test, use
[Up], [Down]
keys to select
[Back]
then press
again to return to previous menu.
4.3.8 Vibration Test
In the page of
[Vibration Test]
, you can test whether the Vibration is normally functioning
or not.
1
Enter
[Operator Settings] > [Hardware Test] > [Vibration Test]
.
2
After selecting
[Vibration Test]
and pressing the key, the system will automatically
test vibration from levels 1 to 4 (1/4 - 4/4). Press the key to cancel the test.
3
After completing the test, use
[Up], [Down]
keys to select
[Back]
then press
again to return to previous menu.
Hardware Test