Baohui IGS Speed rider 3DX User Manual Download

Page: 8 / 100

Quick installation

Quick installation

•

Example of connecting 4 cabinets (viewed from the front of the cabinet):

Cabinet(L)

Cabinet(R)

Please setup the connection here.

Cabinet(L)

Cabinet(R)

Please setup the connection here.

B. Coin Rate Settings

•

Enter

[Operator Settings] > [Game Settings] > [Coin Rate Settings]

, and start to set

the number of coins to be inserted for starting and continuing the game.

C. Setting other related items (recommended)

•

Enter

[Operator Settings] > [System Settings] > [Time Settings]

, and set the cabinets

to be connected to be the same time.

•

Enter

[Operator Settings] > [System Settings]

to set up the location and name of the

store.

•

Enter

[Operator Settings] > [Game Settings] > [Sound Settings]

to set up

[Day Time

Volume]

and

[Night Time Volume]

Summary of Contents for IGS Speed rider 3DX





































































































Search results

Summary of Contents for IGS Speed rider 3DX

Reviews:

Related manuals for IGS Speed rider 3DX

Brands by name

Popular brands

Baohui IGS Speed rider 3DX, User Manual

Search results

Summary of Contents for IGS Speed rider 3DX

Reviews:

Related manuals for IGS Speed rider 3DX

Brands by name

Popular brands