Using the Operator Settings
45
4.3.11 Air Spring Test
On the
[Air Spring Test]
page, you can test if the Air Spring is functioning properly. The
testing steps are as follows:
1
Enter
[Main Menu] > [Hardware Test] > [Air Spring Test]
.
2
To do the Auto Test: After pressing the
[Auto Test]
button, the system will test the
height of each air spring in sequence.
3
Move the cursor up and down, select the position to be tested, and press the
button to start the test.
4
After the test is complete, use the
[Up]
and
[Down]
keys to select
[Return to
Previous Page]
, press the button to return to the previous menu.
Hardware Test
