Using the Operator Settings
42
sending the connection status of all cabinets. Possible connection status
includes:
Connected
,
Checking
,
Connection failed
3
After the testing is completed, press the button again to return to the previous
menu.
Notes:
No matter how many cabinets are connected, the system will automatically
run the testing for four cabinets (1P~4P). If only two cabinets are
connected (such as 1P and 2P), the system will still display connection
failure for 3P and 4P, then you can simply ignore this message.
When the connection could not be built:
1.Check if internet wires are correctly plugged in.
2.Regarding cabinets to be connected, enter
[Operator Settings] > [System
Setting] > [Connection Setting]
and check if all cabinets are appointed
to the same group but a different ID.
4.3.6 Camera Test
In the page of
[Camera Test]
, you can test whether the Camera is normally
functioning or not.
1
Enter
[Operator Settings] > [Hardware Test] > [Camera Test]
.
2
Enter the page and align the camera to check for issues.
2
After the testing is completed, press the button again to return to the previous
menu.
Hardware Test
