• Mounting the Scanner recessed within the vehicle
• Mounting the Scanner under a physical guard or overhanging parts of frame
• Using supplemental safeguarding, such as bumper or edge switches
• Using mechanical barriers to prevent access
3.10.1 Mounting the Scanner Directly to a Surface
The device has two M5 threaded holes on each side. For direct mounting, use both M5 threaded holes on a given side,
taking into account the following values:
• M5 on the back (do not exceed 2.5 to 3 N·m torque), maximum depth of thread engagement 9.5 mm
• M5 on the side (do not exceed 2.5 to 3 N·m torque), maximum depth of thread engagement 8 mm
Important: For direct mounting on the sides, if the wall or panel obstructs the output window, this plane
cannot be used for safety zone monitoring. The safety zone must adhere to the minimum distance to wall
value.
Figure 31. Mounting the scanner directly to a surface
The M5 UNI 5933 screws used for mounting the brackets to a wall are not supplied in the bracket mounting kits; they must
be supplied by the user.
If the direct mounting procedure to the back is chosen, it is not possible to add the protection bracket to the device.
3.10.2 Mounting the Protection Bracket
The protection bracket is an optional accessory that provides protection to the scanner if it is located in an environment
where the scanner may be hit by falling objects or subject to collision.
Fasten the protection bracket (1) on the back of the scanner using two M5 screws (2) (maximum of 3 N·m torque). Mount
the SXA-MBK-2 bracket onto the scanner before the other fastening accessories.
1
2
Bracket Mounted
Figure 32. Mounting the protection bracket to the scanner
Important: This protection bracket consumes the mounting holes on the back of the unit. Use other holes
to mount the scanner to the machine.
3.10.3 Mounting the Angle Adjustment Brackets
Provide two M5 holes with 73 mm spacing on the intended wall or mounting surface. The M5 UNI 5933 screws used for
mounting the brackets to a wall are not supplied in the bracket mounting kits; they must be supplied by the user.
Pitch and roll angle adjustment bracket (SXA-MBK-1)—The bracket system is partially assembled.
SX5 Safety Laser Scanner
www.bannerengineering.com - Tel: +1.763.544.3164
37
