EN 60825-1: 2014
Complies with 21 CFR 1040.10
except for deviations pursuant to
Laser Notice No.50 dated June 24, 2007
Figure 11. Class 1 laser characteristics
2.7.2 For Safe Laser Use (Class 1 or Class 2):
• Do not stare at the laser.
• Do not point the laser at a person’s eye.
• Mount open laser beam paths either above or below eye level, where practical.
• Terminate the beam emitted by the laser product at the end of its useful path.
CAUTION:
• Never stare directly into the sensor lens.
• Laser light can damage your eyes.
• Avoid placing any mirror-like object in the beam. Never use a mirror as a retroreflective target.
2.8 Software Overview
Use SX5soft to establish operational settings for the SX5 and to display measurement and system information produced by
the SX5. Communication between the PC and the SX5 is via an Ethernet network.
The SX5 is preprogrammed at the factory with a default configuration but must be reconfigured for each application. The
factory default configuration sets the Warning and Safety Zones to their maximum limits.
The configuration settings are created by a trained and Qualified Person who understands the SX5 instruction materials.
These settings are saved in an .xml configuration file and includes all the information that the SX5 requires for its intended
operation. An SX5's configuration file includes the following data:
• Administrative data, for example file name, application description
• Safety-relevant data, such as the startup process
• Safety Zone or Warning Zone configuration data, for example contours and limits
The menu progression in the program assists the user with the configuration process.
2.8.1 System Requirements
To use the system, the personal computer must meet the following minimum requirements:
Component
Recommended
Minimum
Processor(s)
Pentium 4
Pentium 4
Clock frequency
≥ 3 GHz
≥ 2 GHz
RAM
2 GB
1 GB
Free hard drive space
70 MB
70 MB
Monitor resolution
1280 × 768
1024 × 768
Supported operating systems
Windows 7, Windows 8, Windows 10
The PC must also be equipped with the following hardware and software drivers:
• Installed Ethernet network card and installed driver
• One free 100 Mbps Ethernet port
SX5 Safety Laser Scanner
18
www.bannerengineering.com - Tel: +1.763.544.3164
