On the Gateway use the DERR menu to clear, disable, or ignore error messages generated by devices within the network.
The Node number that generated the error and the error code (EC) display onscreen. Single-click button 1 to advance
through the menu of CLEAR (clear this particular instance of the error from the system), DISABL (disable this particular error
from appearing from this specific Node), and IGNORE (ignore this error but do not remove it from the system). After the
error messages for a Node are cleared, disabled, or ignored, errors for any additional Nodes display on the Gateway’s LCD.
On the Node use the DERR menu to view and ignore error messages for that Node.
5.2 Web-based Configuration for the GatewayPro on DX83
The Sure Cross wireless systems are configured using an Ethernet network connection and a common Web page browser.
An Ethernet connection can be established from a GatewayPro or from a DX83 Ethernet Bridge serially connected to the
Gateway.
The Ethernet Bridge and GatewayPro each ship with an Ethernet crossover cable. One end of the cable is a RJ45 connector
and the other end is an industrial Ethernet connector. This cable is designed to be connected directly to a computer.
Example Layout #1—When connecting a Gateway to a host system, the wireless network must be configured using the
User Configuration Tool (UCT). When you are not using a GatewayPro or Ethernet Bridge, you cannot configure the wireless
network using the Web Configurator.
Host
1
2
3
1. Power connection
2. Splitter cable and Modbus RTU communication
3. Gateway
Example Layout #2—This system uses a GatewayPro connected directly to a host system using an Ethernet crossover
cable. This system can be configured using the web pages.
Host
1
2
3
1. Ethernet crossover cable using the Modbus/TCP or
EtherNet/IP
™
communication protocol
2. Industrial Ethernet connection
3. GatewayPro
Sure Cross
®
Performance DX80 Wireless I/O Networks
www.bannerengineering.com - Tel: + 1 888 373 6767
37
