Banner Sure Cross DX80 Series Instruction Manual Download

Page: 55 / 69

6.4 Sure Cross

Radio Certifications

Banner's Sure Cross product line is certified by the FCC, European Union, and many other countries for operation within

specific radio frequencies.

6.4.1 FCC Certification, 900 MHz, 1 Watt Radios

The DX80 Module complies with Part 15 of the FCC rules and regulations.
FCC ID: UE3RM1809 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

6.4.1 FCC Notices

IMPORTANT: The radio modules have been certified by the FCC for use with other products without any further certification

(as per FCC section 2.1091). Changes or modifications not expressly approved by the manufacturer could void the user’s

authority to operate the equipment.
IMPORTANT: The radio modules have been certified for fixed base station and mobile applications. If modules will be used

for portable applications, the device must undergo SAR testing.
IMPORTANT: If integrated into another product, the FCC ID label must be visible through a window on the final device or it

must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the

outside of the final device that contains the following text: Contains FCC ID: UE3RM1809.

6.4.1 Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna,

• Increase the separation between the equipment and receiving module,

• Connect the equipment into an outlet on a circuit different from that to which the receiving module is connected,

and/or

• Consult the dealer or an experienced radio/TV technician for help.

Antenna WARNING: This device has been tested with Reverse Polarity SMA connectors with the antennas listed in

Table 2

on page 55. When integrated into OEM products, fixed antennas require installation preventing end-users from replacing

them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203

(unique antenna connectors) and Section 15.247 (emissions).

6.4.1 FCC Approved Antennas

WARNING: This equipment is approved only for mobile and base station transmitting devices. Antenna(s) used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or transmitter.
DX80 Module may be used only with Approved Antennas that have been tested with this module.

Table 2: Certified Antennas for 900 MHz 1 Watt

Model Number

Antenna Type

Maximum Gain

Minimum Required Cable/Connector

Loss

Integral Antenna

Unity gain

BWA-9O1-x

Omni, 1/4 wave dipole

≤2 dBi

BWA-9O2-C