Banner L-GAGE LTF, Instruction Manual

Page: 21 / 38

3.6 Input Menu (INPUT)
Use this menu to view or change the:
• Multi-function input type
or
or
Go Back to Parent Menu
Select Menu Item
Press to Save Setting
Press and Hold to Go Back
to Run Mode
MENU INPUT
Type LasrEnbl
Type Teach
Type SyncMstr
Type SyncSlve
Type Disabled
INPUT Type
Default Setting
Figure 15. Input Menu Map
3.6.1 Input Type
The Type option sets the input type.
Navigate: MENU > INPUT > Type
Remote Input: Not available
Default: Disabled
Input Type Description
Teach The remote input is used to TEACH and program the sensor. (Default)
LasrEnbl The remote input is used to control when the laser emitter is On/Off.
SyncMstr The remote input is used as the Master Sync output to an attached Slave sensor (see Sync Master/Slave
on p. 27).
SyncSlve The remote input is used as the Slave Sync input from an attached Master sensor (see Sync Master/
Slave on p. 27).
Disabled The remote input is disabled.
3.6.2 Input Active
The Active option sets the active state of the remote input. Use the Active options to change the active input to Low or
High.
Navigate: MENU > INPUT > Active
Remote Input: Not available
Default: Low
Input Active Description
Low The remote input detects low (0 V) inputs and high-to-low transitions. (Default)
High The remote input detects high (V+) inputs and low-to-high transitions.
L-GAGE
®
LTF Time of Flight Laser Distance Sensor with IO-Link
www.bannerengineering.com - Tel: + 1 888 373 6767 21