Banner L-GAGE LTF, Instruction Manual

Page: 8 / 38

3 Sensor Programming
Program the sensor using the buttons on the sensor or the remote input (limited programming options).
From Run mode, use the buttons to access the Quick Menu and the Sensor Menu. See
Quick Menu on p. 8 and Sensor
Menu (MENU) on p. 9 for more information on the options available from each menu. For TEACH options, follow the
TEACH instructions.
In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized or
accidental programming changes. See Remote Input on p. 9 for more information.
from Run Mode
Access
Quick Menu
Access
Sensor Menu
See Quick Menu on p. 8 See Sensor Menu (MENU) on p. 9
Figure 6. Accessing the Menus
3.1 Quick Menu
The sensor includes a Quick Menu with easy access to view and change the discrete output switch points. Access the
Quick Menu by pressing Down
or Up from Run mode. When in the Quick Menu, the current distance measurement
displays on the first line and the menu name and the discrete output switch points alternate on the second line of the
display. Press Enter
to access the switch points. Press Down and Up to change each digit. Press Enter to move right
one digit. After reviewing each digit, press Enter again to save the new value and return to the Quick Menu. Press Cancel to
ignore any changes made if only some digits have been changed.
Quick Menu
D1 SPt1 (value)
Run Mode
D1 SPt2*(value)
D2 SPt1 (value)
D2 SPt2*(value)
Spt2 not available unless in
Window Mode
set value with
or
Save setting
and return to
Quick Menu
Cancel and
return to
Quick Menu
access Sensor
Menu (Top Menu)
Figure 7. Quick Menu Map (Window Mode)
L-GAGE
®
LTF Time of Flight Laser Distance Sensor with IO-Link
8 www.bannerengineering.com - Tel: + 1 888 373 6767