3.5.11 Timer
The Timer option sets the delays and timers.
On/Off Delays and On/Off One-Shot timers can
be programmed between 1 to 9999 ms (a value
of 0 disables the delay/timer).
on p.
20 defines how the delays/timers affect the
output behavior.
Navigate: MENU > Dx_OUT > Timer
Remote Input: not available
Default: 0 ms for all timers
Output
OFF Delay
ON Delay
Time
OFF 1-Shot
ON 1-Shot
ON
OFF
D
D
D
D
D
D
D
D
(D = 1 - 9999 ms)
Figure 14. Delays/Timers
Some combinations of delays/timers are not allowed. The programming menu automatically disables invalid combinations
of delays/timers. The following table shows the allowable combinations of delays/timers.
Off Delay
Off One-Shot Timer
On Delay
On One-Shot Timer
Off Delay (OffDly)
OK
OK
OK
N/A
Off One-Shot Timer (Off1Sho)
OK
OK
N/A
N/A
On Delay (OnDly)
OK
N/A
OK
OK
On One-Shot Timer (On1Sho)
N/A
N/A
OK
OK
3.5.12 Polarity
The Polarity option sets the discrete output polarity to either PNP (current sourcing) or NPN (current sinking). The physical
wiring of the sensor and the sensor polarity setting must match.
Remote Input: Not available
Default: PNP
L-GAGE
®
LTF Time of Flight Laser Distance Sensor with IO-Link
20
www.bannerengineering.com - Tel: + 1 888 373 6767
