L-GAGE
®
LT7 Long-Range Time-of-Flight Sensor
8
P/N 120244
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Main
Menu
Procedure
Example Displays
Result
TEACH-IN
(Setup)
–
Discrete
• Press to enter
TEACH-IN menu.
TEACH-IN
<SETQ1>
• Sensor displays current output selected.
• Press or to
scroll through output
options.
<SETQ1>
<SETQ2>
<ANALOG>
(diffuse model only)
• Sensor displays output options.
• Press to select
displayed output.
MODE Q1
• Sensor displays current output and mode selections.
• Press or to scroll
through options for
Output 1.
MODE Q1
TEACH1.1
TEACH1.2
HYST 1
• Sensor displays TEACH options for selected output.
• See following steps for procedures if other than mode Q1.
• Press to view output
mode options.
MODE Q1
• Sensor displays arrow to denote options can be viewed.
• Press or to
scroll through options.
• Sensor displays output mode options.
• Press to select
displayed output mode.
MODE Q1
• Sensor saves selected option.
• Press or to scroll
through options for Output 1.
TEACH 1.1
< 203>
• Sensor again displays TEACH options for selected output.
• Press to select
displayed option.
TEACH 1.1
203
• Sensor is ready to learn limit 1.
• Proceed by teaching limit 1.1 target condition or via
Manual Adjust
TEACH1.1
•
Press to teach target
condition.
TEACH1.1
<241>
Limit 1 value
• Sensor saves limit 1 setting and returns to Output 1 menu
level.
Manual Adjust
• Press to access Manual
Adjust.
TEACH1.1
241
• Press or to
decrease or increase value
of each digit.
• Blinking cursor indicates active digit (beginning with right-
hand digit).
• Press to select and
move one digit left.
• When cursor is at left-hand
digit and value is correct,
press
• Sensor saves setting and returns to Output 1 menu level.
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
���
