L-GAGE
®
LT7 Long-Range Time-of-Flight Sensor
6
P/N 120244
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Procedure
Example Displays
Result
Programming
Mode
No
Password
• From Run mode, press
QuickSet
<ENTER>
• If password is not required (factory preset condition), sensor
proceeds to QuickSet on the Main menu (Figure 7).
Password
Required
• From Run mode, press
PASSWORD
_ _ _ _
Blinking
Cursor
• Sensor waits for valid password (1234); cursor blinks on
right-hand digit.
• If no password is begun within 10 seconds, sensor returns
automatically to Run mode.
• Press button 4 times,*
then press
PASSWORD
_ _ _ 4
• Sensor inserts a 4 in the right-hand digit, then moves blinking
cursor to third position.
• Press button 3 times,
then press
PASSWORD
_ _ 3 4
• Sensor inserts a 3 in the third digit, then moves blinking
cursor to second position.
• Press button twice,
then press
PASSWORD
_ 2 3 4
• Sensor inserts a 2 in the second digit, then moves blinking
cursor to first position.
• Press button once,
then press
PASSWORD
1 2 3 4
• Sensor displays completed password and OK message, then
proceeds to QuickSet on the Main menu.
PASSWORD
OK!
QuickSet
ENTER
���
���
���
���
���
���
���
���
���
���
* Either arrow button may be pressed; button will decrease number by one each time.
���
